REVEAL 802
The custom 8" woofer and 1” tweeter tell you exactly what is going on in your mix through the finely tuned active crossover filter. Combine this with a new 100 watt bi-amp module and you get rock-solid bass at any volume.
Custom tweaked by TANNOY’s in-house speaker guru, Dr. Paul Mills, the active cross-over filters of REVEAL 802 have absolutely impeccable timing.
This produces the ultimate sweet spot so that you can move around in your workspace without losing the stereo imaging of your mix – as well as invite people to sit in with you during mixing sessions. If you’re anything like us, you’re not only working on mixes but also listening to your favorite music! REVEAL 802 gives you the ultimate pathway for both.
With the Aux Link, setting up has never been easier. Use the included mini jack cable to plug into your favorite music player and link your monitors for an instant stereo setup – no need for external interfaces
Specification
General
| Frequency Response |
42 Hz - 43 kHz |
| Max SPL |
114 dB |
Membrane Sizes
| LF/Mid Range |
8" (200 mm) |
| HF |
1" Soft Dome (25 mm) |
Bi-amp Output Power, RMS
| Power Output |
100 Watts |
| LF/Mid Range |
75 Watts |
| HF |
25 Watts |
| THD |
< 0.4 % |
Input Types and Impedances
| Balanced |
XLR, 20 kOhm |
| Unbalanced |
¼" Jack, 10 kOhm |
| AUX Link |
Mini Jack, 10 kOhm |
| AUX Link Output |
Mini Jack |
EQ Options
| HF EQ Settings |
-1.5 dB HF Cut / Neutral / +1.5 dB HF Boost |
| Crossover Frequency |
1.8 kHz |
| Low Frequency Alignment |
Optimized Front Port |
Cabinet Dimensions
| HxWxD, inches |
15.4 x 10.0 x 11.8 |
| HxWxD, mm |
390 x 254 x 300 |
