The CX14A is a coaxial stage monitor designed specifically for live sound, although the very compact, low-profile enclosure also makes it suitable for theatre and television applications. The combination of a high-performance coaxial transducer, a carefully designed cabinet, and powerful electronics provides very high SPL before feedback and excellent intelligibility even at very high power.
The transducer’s coaxial design offers a very stable acoustical pattern in both the horizontal and vertical axes. The very compact, single magnet neodymium motor reduces the delay between the two sources, eliminating time and phase problems, and guarantees high performance with a consistent weight reduction.
The high frequency range is reproduced by a low-distortion compression driver equipped with a 3” aluminium voice coil and polyester/titanium diaphragm. The special shape of the cone allows precise and controlled conical dispersion of 80°. The 14” woofer employed in the reproduction of the low frequency range is equipped with a 3” voice coil. Thanks to a special treatment process that makes the cone water repellent, the CX14A is able to perform in adverse weather conditions and is therefore suitable for outdoor use.
| SYSTEM | |
| System’s Acoustic Principle | 2-way coaxial vented enclosure |
| Frequency Response (-3dB) | 70 Hz – 18kHz (Processed) |
| Horizontal Coverage Angle | 80° (-6dB) |
| Vertical Coverage Angle | 80° (-6dB) |
| Maximum (peak) Output | 131 dB SPL @ 1m |
| TRANSDUCERS | |
| LF | One 14” (355mm), 3” (75mm) voice coil,
waterproof cone |
| HF | One 2” driver, 3” (75mm) aluminium voice coil,
polyesther/titanium diaphragm |
| ELECTRICAL | |
| Input Impedance | 20 kΩ balanced, 10 kΩ unbalanced |
| Input Sensitivity | +4dBu / 1.25 V |
| Signal Processing | CORE processing, 96kHz / 40bit floating point SHARC DSP,
24 bit AD/DA converters |
| Direct access Controls | 4 Presets (NORMAL WEDGE/COUPLED/LOW CUT/USER),
Network Termination, GND Link |
| Remote Control | PRONET control software |
| Network protocol | CANBUS |
| Amplifier Type | Class D with SMPS |
| Output Power | 900W + 300W |
| Mains Voltage Range (Vac) | 230V ±15% - 115 ±15% 50/60Hz (internally selectable) |
| IN / OUT Connectors | Neutrik XLR-M / XLR-F |
| IN / OUT Network Connectors | ETHERCON®(NE8FAV) |
| Mains Input Connector | PowerCon® (NAC3MPA) |
| Mains Link Connector | PowerCon® (NAC3MPB) |
| Cooling | Variable speed DC fan |
| ENCLOSURE & CONSTRUCTION | |
| Width | 507 mm |
| Height | 316 mm |
| Depth | 403 mm |
| Taper | Stage Monitor: 45° and 55° |
| Pole holder | 1 on the side, dual-angle |
| Enclosure Material | 15mm, reinforced phenolic birch |
| Paint | High resistance, black water based paint |
| Net Weight | 16 kg (35.3 lb) |
